Traditional Booster Pump structure:
Disphragm and Piston are separate parts.
Diaphragm is soft material, and Piston is hard material.During pump working, the Diaphragm and Piston rub each other, Some time later,the diaphragm is broken,and then leakage happens.
Our IMPROVED Booster Pump ADVANTAGE:
1).Diaphragm and Piston are made in same part.
2).No friction happens between Diaphragm and Piston
3).Never leakage from the pump back part because of its airtight structure.
4).We have patent about the pump structure.
Specification(50GPD):
1.Open electric current: ¡Ü0.25A
2.Working electric current:0.6+-0.1A
3.Working Voltage:24VDC+-5V
4.Max electric current:0.9A
5.Inlet water pressure: 0¡ÜP¡Ü30Psi
6.Outlet water pressure:P¡Ü150Psi
7.Sucking Height:¡Ý2m
8.Flow rate:¡Ý0.55LPM (inlet pressure 30psi and outlet pressue 90Psi)
9.Recycled water test:Water hammer(0-150psi)pressure aging test on 100,000 times
10.Hydrostatic Burst Test: ¡Ý3.2Mpa(464psi)
11.Leak Tightness:40Psi,60Psi,80Psi,100Psi,120Psi,150Psi test for 15 minutes.
12.Max.Hydrostatic Pressure Test:170psi for 5 minutes
13.Surface Temperature:¡Ü50¡æ
14.Noise:¡Ü50dB(inlet pressure 20psi and outlet pressue 90Psi)
15.Body Insulation test: 3000Vac/50Hz / attack for one minute
16.Aging test:On and off more than 100,000 times |
¡¡
